Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml

Send Inquiry

Request To Call Back

Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml

Name: Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml
Brand: Alpha Infra Supplies
Price: 291.0 INR
Availability: InStock

Price 291.0 INR/ Pack

Get a Price/Quote

MOQ : 12 Packs

Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml Specification

Usage
Construction anchoring and grouting applications

Appearance
Thick, thixotropic grey paste

Chemical Name
Lokfix P

Molecular Formula
Not Applicable (Mixture)

Smell
Mild chemical odour

Grade
Construction Grade

Color
Grey

Other Names
Lokfix P, Anchor Grout Compound

Water Content
< 0.5%

Purity
> 99%

Physical Form
Other

Poisonous
Non-toxic (follow safety instructions)

Type
Liquid + Power

CAS No
Not Available (Mixture)

HS Code
3824

Application
Grouting for anchoring bolts, rebar, starter bars, threaded rods into concrete, masonry, stone or brickwork

Feature
Fast-setting, strong bonding, non-shrink, chemical resistant

Pot Life
Approx. 15 minutes at 20C (cartridge use)

Tensile Strength
> 13 MPa after 7 days

Storage Conditions
Store in original, unopened packaging in a cool, dry place (5C to 30C), away from direct sunlight

Packaging Size
500 ml Dual Cartridge

Mixing Ratio
Packaged for direct dispensing, pre-measured

Cure Time (Initial/Full)
Initial Set: 30-45 minutes at 20C; Full Cure: 24 hours

VOC Content
Low

Bond Strength to Concrete
> 10 MPa

Compressive Strength
> 70 MPa after 7 days at 25C

Dispensing Method
Dual Cartridge with static mixer nozzle for use with standard applicator (caulking gun)

Density
~1.7 kg/litre

Shelf Life
12 Months (unopened, stored in dry, cool conditions)

Standards
Meets ASTM E488 (anchoring standards)

Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml Trade Information

Minimum Order Quantity
12 Packs

Delivery Time
1 Week

Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml About

Main Uses

Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages. The two versions of Lokfix available are :

Lokfix S : Pourable grade, 25 minute gel time at 20C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar.

Lokfix P : Thixotropic grade, 25 minute gel at 20C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P reduces flow of grout out of the hole.

Advantages

Rapid strength gain.
Vibration resistant.
Corrosion resistant.
Non-expansive.
Can be placed underwater

High-Strength Performance for Anchoring

Lokfix P delivers over 80 MPa compressive strength after seven days, ensuring solid anchoring for heavy-duty construction projects. Its strong bonding capabilities suit demanding applications, including securing bolts and rods into concrete, masonry, and brickwork. This grout meets international standards, ensuring reliability and structural integrity for critical construction anchoring needs.

User-Friendly Application and Fast Setting

The compound is supplied in an easy-to-use 500 ml cartridge, pre-measured to remove the guesswork from application. Using an applicator gun, users can extrude the thixotropic paste directly into anchor holes without manual mixing. The product boasts a rapid initial set time of 10-20 minutes at 20C and reaches full strength in approximately two hours, minimizing downtime on site.

Durability & Chemical Resistance

This styrene-based polyester resin grout is engineered to withstand exposure to alkalis, dilute acids, oils, and most common chemicals encountered in construction environments. Its non-shrink formula maintains anchor integrity over time, delivering long-term resistance to environmental stresses. Lokfix P is also non-toxic when used according to safety guidelines, supporting safe handling and installation.

FAQ's of Fosroc Lokfix P Anchor Grouting Compound, For Construction, 500ml:

Q: How is Fosroc Lokfix P Anchor Grouting Compound applied?

A: Lokfix P is supplied in a pre-measured 500 ml cartridge and is applied by extruding the material from the cartridge directly into drill holes using a suitable applicator gun. No manual mixing is required, making application straightforward and consistent.

Q: What are the main uses of Lokfix P Anchor Grout Compound?

A: This grout is primarily used for anchoring bolts, rebar, starter bars, and threaded rods into concrete, masonry, stone, or brickwork, making it ideal for a wide range of construction anchoring and grouting applications.

Q: When does the product achieve full cure and maximum strength?

A: At 20C, Lokfix P achieves its initial set within 10-20 minutes and reaches full cure, including a compressive strength greater than 80 MPa, in approximately two hours.

Q: Where should Lokfix P be stored to maintain shelf life and performance?

A: Store Lokfix P below 30C and away from direct sunlight in its unopened cartridge to maintain peak effectiveness and achieve the stated 12-month shelf life.

Q: What benefits does Lokfix P offer over traditional anchoring methods?

A: Lokfix P provides fast setting, strong bonding, non-shrink performance, and high chemical resistance. Its cartridge packaging eliminates manual mixing, reducing errors and installation time on construction sites.

Q: Is Lokfix P suitable for use in chemically exposed environments?

A: Yes, Lokfix P is resistant to alkalis, dilute acids, oils, and most common construction chemicals, making it suitable for demanding or chemically aggressive environments.

Tell us about your requirement