Call us now
07971405851
Send InquiryFosroc Lokfix E45T Vinyl Easter Resin, Packaging Size: 300 ml
Price 780.0 INR/ Piece
MOQ : 10 Pieces
Fosroc Lokfix E45T Vinyl Easter Resin, Packaging Size: 300 ml Specification
- Appearance
- Viscous Paste
- CAS No
- Not Applicable (Mixture)
- Water Content
- <1%
- Other Names
- Lokfix E45T
- Poisonous
- Non-toxic when used as directed
- Feature
- High bond strength, rapid curing, suitable for dry, wet or flooded holes
- Type
- pouch`
- Usage
- Used for chemical anchoring in construction
- HS Code
- 3907
- Application
- Anchoring bolts, dowels, and reinforcing bars into concrete, masonry and stone substrates
- Purity
- Industrial Grade
- Chemical Name
- Lokfix EP45T
- Grade
- Construction Grade
- Color
- Beige
- Physical Form
- Liquid
- Smell
- Characteristic, Mild odour
- Molecular Formula
- Not Applicable (Mixture)
- Cure Time
- Initial set approx. 15 min at 20C (depends on substrate and conditions)
- Shelf Life
- 12 months from manufacture in unopened packaging
- Tensile Strength
- Approx. 12 MPa
- Packaging Size
- 300 ml cartridge
- Tool Cleaning
- Clean tools immediately after use with a suitable solvent
- Service Temperature
- -20C to +80C
- Density
- Approx. 1.70 - 1.80 g/cm3
- Standards Compliance
- Conforms to international anchoring standards
- Storage Conditions
- Store in cool, dry conditions away from direct sunlight
- Mix Ratio
- Supplied as pre-measured two-component cartridge system
- Bond Strength
- Excellent adherence to concrete & masonry
- VOC Content
- Low VOC formulation
- Compressive Strength
- Above 70 MPa (after full cure)
- Model Name/Number
- Lokfix E45T
Fosroc Lokfix E45T Vinyl Easter Resin, Packaging Size: 300 ml Trade Information
- Minimum Order Quantity
- 10 Pieces
- Delivery Time
- 1 Week
About Fosroc Lokfix E45T Vinyl Easter Resin, Packaging Size: 300 ml
Styrene free vinyl-ester resin based cartridge system, for anchoring reinforcement and fixings into a variety of substrates. Extended setting for hot climates.
Main uses
Lokfix E45T is Fosrocs solution for medium duty anchoring into cracked and un-cracked concrete and post installation of reinforcement. Also used in stone and masonry. Comes with industry leading accreditation and design software.
For concrete (solid, porous and light), masonry and hollow bricks.
Accredited* for use in dry, wet and flooded concrete substrates, internal and external exposure.
Can be used with cracked concrete
Fixing of post installed reinforcement and tension anchors
Anchoring of threaded rod fixings
Can be applied to a wide variety of fixing and rebar sizes
For horizontal, vertical and overhead application
Bonding and surface crack sealing applications prior to Nitofill injection.
Advantages
High bond strength
Extended open time for working in high temperatures or on complex setting configurations.
Can use with a good quality skeleton gun (300ml size), No additional mixing equipment required
Does not apply expansive force to the substrate
Enables fixings closer to edges than mechanical anchors
Low VOC
Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
Waterproof, protecting the embedded fixing from corrosion and water penetration into the substrate.
C1 and C2 seismic resistance*
* Always consult technical information for specific details
Rapid, High-Strength Anchoring Solution
Fosroc Lokfix E45T offers exceptional bond strength and rapid curing, making it the ideal choice for chemical anchoring in construction environments. Its reliable, efficient cartridge system and versatile application suit both dry and wet substrates, providing a secure hold for bolts, dowels, and reinforcement bars. Designed for professional use, this resin ensures compliance with leading standards and lasting performance.
Convenient, Easy-to-Use Packaging
Supplied in a 300 ml cartridge, Lokfix E45T's self-mixing system allows for straightforward and mess-free installation. This packaging conserves material and enables precise mixing ratios, ensuring every use achieves the resin's full potential. Storage is simple-maintain in cool, dry, and well-ventilated conditions for a 12-month shelf life.
FAQ's of Fosroc Lokfix E45T Vinyl Easter Resin, Packaging Size: 300 ml:
Q: How is Fosroc Lokfix E45T applied in construction projects?
A: Lokfix E45T is supplied in a 300 ml cartridge designed for use with standard cartridge guns. The self-mixing system within the cartridge ensures the resin and hardener are thoroughly combined during application. This makes it easy to anchor bolts, dowels, or rebar directly into concrete, masonry, or stone.Q: What are the curing times for Fosroc Lokfix E45T and when can full loads be applied?
A: At 20C, Lokfix E45T gels within approximately 5 to 10 minutes. Full load capacity can be applied after 24 hours, enabling rapid project progression while maintaining high-performance anchoring.Q: Where can Lokfix E45T be used and on which substrates is it effective?
A: Lokfix E45T is formulated for anchoring into a variety of substrates, including concrete, masonry, and stone. It performs effectively in both dry and wet conditions, allowing use in typical and challenging site environments.Q: What benefits does using Fosroc Lokfix E45T provide over traditional mechanical anchors?
A: Fosroc Lokfix E45T ensures a high bond strength with compressive strengths exceeding 60 MPa after 7 days. It allows secure fixing even in flooded holes or damp substrates, eliminates stress points common in mechanical anchors, and adapts to irregular holes for maximum hold.Q: How should Fosroc Lokfix E45T cartridges be stored for optimal shelf life?
A: Cartridges should be stored unopened in a cool, dry, and well-ventilated area. When stored under these conditions, Lokfix E45T maintains its performance and usability for up to 12 months.Q: Is Fosroc Lokfix E45T resin safe to use?
A: Lokfix E45T is non-toxic when used as directed, but as with any construction chemical, it should be handled according to the manufacturer's instructions. It has a mild, characteristic odour and contains less than 1% water content.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in Construction Chemical Category
STP Shaliseal PS PG I
Minimum Order Quantity : 100 Kilograms
Physical Form : Other, Paste
Type : Polysulphide Sealant
Chemical Name : Polysulphide
Usage : Industrial, Commercial and Residential Construction
Cebex 100 Expanding Grout Additive
Minimum Order Quantity : 100 Kilograms
Physical Form : Powder
Type : Expanding Grout Additive
Chemical Name : Cebex 100
Usage : Added to grout mixes at the rate recommended by the manufacturer (typically 225g per 50kg cement)
20 Ltr Road And Kerb Marking Paint
Minimum Order Quantity : 100 Kilograms
Physical Form : Liquid
Type : Thermoplastic Road and Kerb Marking Paint
Chemical Name : Acrylic Modified Alkyd Resin Paint
Usage : Used for demarcating lanes, kerbs, crosswalks, and safety markings on roads and pavements
Sika Sikadur 32 LP IN (6 kg Pack)
Price 3500.0 INR / Kilograms
Minimum Order Quantity : 6 Kilograms
Physical Form : Liquid
Chemical Name : Sika Sikadur 32 LP IN (6 kg Pack)
Usage : Connecting new concrete overlays to old slabs, beams, and columns. Structural repairs and retrofitting in bridges, metros, and buildings. Bonding concrete to steel, stone, and mortar.
3rd Floor, 301, Rounak Deep Apartment, 197 Anoop Nagar,Indore - 452018, Madhya Pradesh, India
Phone :07971405851
Send Inquiry
Send Inquiry
Send SMS
Developed and Managed by Infocom Network Private Limited.
