Sika Sikagard 67 - 2 Part Epoxy Coating (Food Grade) - 8 kg Pack 7035 (Light grey)

About Sika Sikagard 67 - 2 Part Epoxy Coating (Food Grade) - 8 kg Pack 7035 (Light grey)

Sikagard-67 is a two-part, water-based, solvent-free, and odorless epoxy resin protective coating manufactured by Sika. It is designed to provide long-lasting protection for a variety of surfaces, primarily concrete and other cementitious substrates.

• Protective Coating: Its main purpose is to protect structures from weathering, mild chemical attack, and general wear and tear. It forms a durable and resistant layer on the surface.

• Versatile Application: Sikagard-67 can be applied to a wide range of surfaces, including concrete, rendering, stone, and cement.

• Specific Applications: It is commonly used in areas that require a protective and durable finish, such as:

  • Retaining walls and basements

  • Reservoirs, including those for potable water (it is food-grade)

  • Cantilevers, galleries, and balconies

  • Workshops and other industrial settings

• Chemical Resistance: It offers good resistance to oil, grease, and mild chemical attacks.

• Weather Resistance: The coating is weatherproof and resistant to mildew, making it suitable for both interior and exterior applications.

• Adhesion: It is known for its excellent adhesion, even to damp surfaces.

• Safety and Environmental: As it is water-based, it is solvent-free and odorless, making it a safer option for both users and the environment.

• Chemical Base: Water-dispersed epoxy resin.

• Components: It comes in two parts (Part A and Part B) that must be mixed thoroughly before application.

• Mixing Ratio: The mixing ratio is typically 1:1 by weight.

• Application: Sikagard-67 can be applied by brush, roller, or spray.

• Curing: The product has a pot life (working time after mixing) that varies with temperature. It is tack-free in a few hours, but a full cure can take up to 7 days.

• Colors: It is available in a variety of colors, including off-white, light gray, and sand yellow, among others.

• Consumption: The consumption rate varies depending on the application (primer or seal coat) and the porosity of the surface. A typical consumption for a seal coat is around 0.15 - 0.25 kg/m per coat.