Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag

Send Inquiry

Request To Call Back

Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag

Name: Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag
Brand: Alpha Infra Supplies
Price: 71.0 INR
Availability: InStock

Price 71.0 INR/ Kilograms

Get a Price/Quote

MOQ : 1 Kilograms

Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag Specification

Type
Bottle & Bag

Molecular Formula
Not Applicable (Mixture)

Ph Level
12-13 (mixed slurry)

Purity
High purity blend with no foreign contaminants

Water Content
1% (as supplied)

Application
Brush, roller or trowel applied coating for waterproofing concrete and masonry surfaces

Molecular Weight
Not Applicable (Mixture)

Grade
Industrial grade

HS Code
38244090

Other Names
Nitocote CM210

Appearance
Grey/White Powder (Part A) & White Liquid (Part B)

Feature
Excellent waterproofing, high adhesion, flexible, suitable for potable water tanks

Chemical Name
Blend of Cement, Fillers, Polymers and Additives

CAS No
Not Applicable (Mixture)

Color
Grey or White (depends on grade)

Melting Point
Not Determined / Not Applicable

Poisonous
NO

Usage
Internal and external waterproofing for basements, water tanks, roofs, swimming pools, bathrooms, and balconies

Smell
Mild cementitious odor

Physical Form
Powder

Pack Size
20 kg set (15 kg powder + 5 kg liquid polymer)

Compliance Standards
EN 1504-2, IS 2645, BS 6920

Toxicity
Non-toxic as per BS 6920

Storage Condition
Store in cool, dry place, away from moisture

Compressive Strength
>20 MPa after 28 days

Full Cure
7 days

Pot Life of Mix
45 minutes at 25C

Shelf Life
12 months from date of manufacture if unopened

Water Penetration Resistance
No penetration at 7 bar (as per EN 12390-8)

Tack Free Time
1-2 hours

Coverage
Approximately 1.8-2.0 kg/m2 at 1 mm thickness

Adhesion to concrete
>1.0 N/mm2

Packaging Type
Bottle & Bag

Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag Trade Information

Minimum Order Quantity
1 Kilograms

Delivery Time
1 Week

About Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag

Main Uses

Nitocote CM210 is a cementitious coating, used for waterproofing water retaining structures and water excluding structures.

Nitocote CM210 provides a waterproof coating suitable for use in water tanks, reservoirs, canals and culverts.

The material can be used on concrete, brick and blockwork substrates.

Suitable for application to below ground retaining wall and foundation structures including construction joints to maintain waterproofing continuity as part of a waterproofing solution conforming to BS8102:2009.

Advantages

No primer required
Suitable for light foot traffic prior to installation of protective finishes
Withstands high positive and negative hydrostatic pressures
Excellent bond to concrete and masonry
Long working time for ease of application
Easy application by brush, roller, trowel or spray
Can be applied to green or damp concrete
Effective barrier to sulfates and chlorides

Superior Waterproofing Solution

Nitocote CM210 delivers advanced protection for a variety of concrete and masonry surfaces. With its high flexibility and waterproofing, the product ensures long-lasting shielding against water ingress-making it suitable for highly demanding applications such as potable water tanks, basements, and swimming pools. Its robust adhesion and impermeability comply with rigorous international standards.

Straightforward Application and Fast Curing

Supplied in a convenient two-part system, Nitocote CM210 is simple to mix and apply with common tools like brushes, rollers, or trowels. Each coat typically reaches a thickness of 1 mm, with a minimum of two coats recommended for optimal results. The membrane offers an initial cure within 4-6 hours and achieves full strength in 7 days, allowing rapid project turnaround.

Safe and Reliable for Industrial and Domestic Use

Nitocote CM210 is non-toxic once cured, features a low VOC profile, and is designed for safe use in both industrial and residential environments. Its durability, compatibility with potable water, and minimal maintenance requirements make it an ideal choice for a wide range of waterproofing needs.

FAQ's of Fosroc Nitocote CM210 Waterproofing Chemical, Packaging Type: Bottle & Bag:

Q: How should I mix and apply Fosroc Nitocote CM210 for best results?

A: To prepare Nitocote CM210, blend Part A (powder) and Part B (liquid) using a 3:1 weight ratio (18 kg powder to 6 kg liquid) until a consistent slurry is achieved. Apply the mixture to clean, damp (not wet) concrete using a brush, roller, or trowel in two coats, each about 1 mm thick, allowing the initial coat to set (4-6 hours) before applying the second.

Q: What surfaces and locations are suitable for Nitocote CM210 application?

A: Nitocote CM210 is ideal for waterproofing both internal and external surfaces such as basements, water tanks (including potable water tanks), swimming pools, bathrooms, roofs, and balconies. It adheres well to concrete and masonry, providing durable protection in both residential and commercial settings.

Q: When is the waterproofed area ready for use after applying Nitocote CM210?

A: Initial curing occurs within 4-6 hours, but allow the coated area to cure fully for 7 days before exposing it to standing water, heavy use, or backfilling, to ensure maximum waterproofing performance and membrane strength.

Q: What are the key benefits of using Nitocote CM210 over conventional waterproofing solutions?

A: Nitocote CM210 offers superior flexibility (elongation > 80%), outstanding adhesion, impermeability to water per DIN 1048, and compatibility with potable water. It forms a continuous, seamless barrier, is non-toxic when cured, and resists cracking and chemical attack better than traditional cementitious coatings.

Q: Where should Nitocote CM210 be stored and what is its shelf life?

A: Store unopened Nitocote CM210 packaging in a cool, dry place, protected from direct sunlight, moisture, and frost. The product retains its properties for up to 12 months when properly stored at temperatures below 30C.

Q: How much coverage does a 24 kg pack provide and what is the recommended thickness?

A: A standard 24 kg pack covers approximately 7 square meters at a total 2 mm thickness (applied in two 1 mm coats). Ensure even application to achieve full waterproofing benefits.

Q: What makes Nitocote CM210 suitable for potable water tanks and sensitive environments?

A: Once cured, Nitocote CM210 is non-toxic, low in VOC, and designed to meet the requirements for coating surfaces in contact with potable water, ensuring safe, odor-free, and reliable waterproofing for drinking water storage and sensitive areas.

Tell us about your requirement